Mofuta oa Pontšo | OLED |
Lebitso la lebitso | HLALEFISO |
Boholo | 2.70 inch |
Lipikseli | 128×64 Matheba |
Boemo ba Pontšo | Passive Matrix |
Sebaka se sebetsang (AA) | 61.41×30.69 limilimithara |
Boholo ba Panel | 73×40.24×2.0 limilimithara |
Mmala | Bosoeu/Boputsoa/Bosehla |
Khanya | 50 (Mets)cd/m² |
Mokhoa oa ho khanna | Phepelo ea kantle |
Sehokedi | Parallel/I²C/4-terata SPI |
Mosebetsi | 1/64 |
Nomoro ea Pin | 30 |
Mokhanni IC | SSD1327 |
Palo ea li-volts | 1.65-3.3 V |
Boima ba 'mele | TBD |
Mocheso oa Ts'ebetso | -40 ~ +70 °C |
Mocheso oa polokelo | -40 ~ +85°C |
X270-2864ASWHG03-C30 ke ponts'o ea 2.70” COG Graphic OLED, e entsoeng ka qeto ea 128x64 pixels.Module ona oa ponts'o ea OLED o na le boholo ba kemiso ea 73 × 40.24 × 2.0 mm le boholo ba AA 61.41 × 30.69 mm.
Mojule ona o hahiloe ka har'a SSD1327 controller IC;e ka tšehetsoa ka tsela e tšoanang, e 4-line SPI, le I²C interfaces;matla a phepelo ea logic ke 3.0V (boleng bo tloaelehileng), 1/64 mosebetsi oa ho khanna.
X270-2864ASWHG03-C30 ke ponts'o ea COG ea OLED, mojule ona oa OLED o loketse lits'ebetso tsa lapeng tse bohlale, lisebelisoa tse tšoaroang ka letsoho, lisebelisoa tse bohlale tsa theknoloji, likoloi, lisebelisoa, lisebelisoa tsa bongaka, jj.
Mojule oa OLED o ka sebetsa ka mocheso ho tloha -40 ℃ ho ea ho +70 ℃;mocheso oa eona oa polokelo o tloha ho -40 ℃ ho ea ho +85 ℃.
1. Thin–Ha ho hlokahale hore u bone khanya e ka morao, ho itšehla thajana;
2. Wide viewing angle : Free degree;
3. Khanya e Phahameng: 80 cd/m²;
4. Karolelano e phahameng ea phapang(Kamore e Lefifi): 2000:1;
5. Lebelo le phahameng la karabo (<2μS);
6. Mocheso o Pharalletseng oa Ts'ebetso;
7. Tšebeliso e tlaase ea matla.
Re hlahisa tlhahiso ea rona ea morao-rao, skrini se senyenyane sa 2.70-inch sa 128x64 dot OLED!Mojule ona oa ponts'o ea maemo a holimo o fana ka likarolo tse tsoetseng pele le ts'ebetso e phahameng, e e etsa khetho e phethahetseng bakeng sa lits'ebetso tse fapaneng.
Mojule ona oa ponts'o oa OLED o na le boholo bo kopaneng ba lisenthimithara tse 2.70, e leng se etsang hore e loketse ho kenya lisebelisoa tse nyane ntle le ho senya boleng le ts'ebetso.Qeto ea matheba a 128x64 e netefatsa lipono tse hlakileng le tse hlakileng bakeng sa boiphihlelo bo se nang moeli ba mosebelisi.
Mojule oa ponts'o o sebelisa theknoloji ea OLED ho fana ka boleng bo botle ba setšoantšo, phapang e phahameng le mebala e hlakileng.OLED e fana ka maemo a matšo a tebileng le li-angles tsa ho shebella tse pharalletseng ho feta mahlale a mang a ponts'o, ho netefatsa hore litaba tsa hau lia hlahella le ho hohela bamameli ba hau.
Mojule ona o na le IC ea mokhanni ea hahelletsoeng, e nolofatsang kopanyo le ho fokotsa ho rarahana ha morero.IC ea mokhanni e boetse e kenyelletsa likhetho tse fapaneng tsa li-interface, e etsa hore e lumellane le mefuta e fapaneng ea li-microcontrollers le liboto tsa nts'etsopele, e lumellang ho hokahanngoa habonolo ho sistimi ea hau e teng.
Ka lebaka la tšebeliso e tlase ea matla, mojule ona oa ponts'o ha o boloke matla feela empa o boetse o lelefatsa bophelo ba betri ea sesebelisoa, e leng se etsang hore e be khetho e ntle bakeng sa lits'ebetso tse nkehang habonolo.Hore na o etsa lisebelisoa tse aparoang, lisebelisoa tsa bongaka kapa litsamaiso tsa taolo ea indasteri, mojule ona oa OLED o tla kopana le ho feta litebello tsa hau.
Ho feta moo, module e etselitsoe ho tsepamisa maikutlo ho tšoarella le ts'ebetso e tšoarellang nako e telele, ho netefatsa hore e khona ho mamella maemo a thata a ts'ebetso.Moralo oa eona o kopaneng le moaho o matsutla o etsa hore e tšoanele libaka tse fapaneng, ho kenyeletsoa lits'ebetso tsa kantle le tsa indasteri.
Ka kakaretso, skrine ea module ea 2.70-inch e nyane ea 128x64 dot OLED ke tharollo e ka tšeptjoang bakeng sa litlhoko tsa hau tsa pontšo.Boholo ba eona bo kopaneng, qeto e phahameng le likarolo tse tsoetseng pele li etsa hore e be e loketseng lits'ebetso tse fapaneng.Eba le theknoloji ea ponts'o ea nako e tlang ka li-module tsa rona tsa phetoho ea OLED."