Rea u amohela sebakeng sena sa Marang-rang!
  • ntlo-banner1

0.50“ Micro 48×88 Dots OLED Display Module Screen

Tlhaloso e Khutšoanyane:


  • Nomoro ea Mohlala:X050-8848TSWYG02-H14
  • Boholo:0.50 inch
  • Lipikseli48x88 Matheba
  • AA:6.124×11.244 limilimithara
  • Kemiso:8.928×17.1×1.227 limilimithara
  • Khanya:80 (Mets)cd/m²
  • Sehokelo:SPI/I²C
  • Mokhanni IC:CH1115
  • Lintlha tsa Sehlahisoa

    Li-tag tsa Sehlahisoa

    Tlhaloso e Akaretsang

    Mofuta oa Pontšo OLED
    Lebitso la lebitso HLALEFISO
    Boholo 0.50 inch
    Lipikseli 48x88 Matheba
    Boemo ba Pontšo Passive Matrix
    Sebaka se sebetsang (AA) 6.124×11.244 limilimithara
    Boholo ba Panel 8.928×17.1×1.227 limilimithara
    Mmala Monochrome (Tšoeu)
    Khanya 80 (Mets)cd/m²
    Mokhoa oa ho khanna Phepelo ea ka hare
    Sehokedi SPI/I²C
    Mosebetsi 1/48
    Nomoro ea Pin 14
    Mokhanni IC CH1115
    Palo ea li-volts 1.65-3.5 V
    Boima ba 'mele TBD
    Mocheso oa Ts'ebetso -40 ~ +85 °C
    Mocheso oa polokelo -40 ~ +85°C

    Tlhahisoleseding ya Sehlahiswa

    X050-8848TSWYG02-H14 ke ponts'o e nyane ea OLED e entsoeng ka matheba a 48x88, boholo ba diagonal 0.50 inch.X050-8848TSWYG02-H14 e na le kemiso ea module ea 8.928 × 17.1 × 1.227 mm le Active Area boholo 6.124 × 11.244 mm;e hahiloe ka CH1115 molaoli oa IC;e ts'ehetsa khokahanyo ea 4-wire SPI/I²C, phepelo ea motlakase ea 3V.X050-8848TSWYG02-H14 ke ponts'o ea COG ea PMOLED e sa hlokeng khanya ea morao-rao (e ikemetseng);e bobebe ebile e na le tšebeliso e tlase ea matla.Mojule oa ponts'o o na le khanya e fokolang ea 80 cd/m², e fana ka ho hlaka hantle le libakeng tse khanyang. e loketse sesebelisoa se ka roaloang, E-Cigarette, sesebelisoa se nkehang, sesebelisoa sa tlhokomelo ea motho, pene ea ho rekota lentsoe, sesebelisoa sa bophelo bo botle, jj.
    e bobebe ebile e na le tšebeliso e tlase ea matla.motlakase oa phepelo bakeng sa logic ke 2.8V (VDD), 'me motlakase oa phepelo bakeng sa pontšo ke 7.5V(VCC).Ea hona joale e nang le 50% checkerboard display ke 7.4V (bakeng sa 'mala o mosoeu), 1/48 mosebetsi oa ho khanna.mochini o ka sebetsa ka mocheso ho tloha -40 ℃ ho ea ho +85 ℃;mocheso oa eona oa polokelo o tloha ho -40 ℃ ho ea ho +85 ℃.

    N033- OLED (1)

    Ka tlase ke melemo ea pontšo ena ea OLED ea matla a tlase:

    1. Thin–Ha ho hlokahale hore u bone khanya e ka morao, ho itšehla thajana;

    2. Wide viewing angle : Free degree;

    3. Khanya e Phahameng: 100 cd/m²;

    4. Karolelano e phahameng ea phapang(Kamore e Lefifi): 2000:1;

    5. Lebelo le phahameng la karabo (<2μS);

    6. Mocheso o Pharalletseng oa Ts'ebetso;

    7. Tšebeliso e tlaase ea matla.

    Sets'oants'o sa Mechini

    049-OLED (3)

  • E fetileng:
  • E 'ngoe:

  • Ngola molaetsa wa hao mona mme o re romele wona