FF-0.32“ Micro 60×32 OLED Display Module Screen
Tlhaloso e Akaretsang
| Mofuta oa Pontšo | OLED |
| Lebitso la lebitso | HLALEFISO |
| Boholo | 0.32 inch |
| Lipikseli | 60x32 Matheba |
| Mokhoa oa Pontšo | Passive Matrix |
| Sebaka se sebetsang(AA) | 7.06×3.82mm |
| Boholo ba Panel | 9.96×8.85×1.2mm |
| Mmala | Bosoeu (Monochrome) |
| Khanya | 160(Mets)cd/m² |
| Mokhoa oa ho khanna | Phepelo ea ka hare |
| Sehokedi | I²C |
| Mosebetsi | 1/32 |
| Nomoro ea Pin | 14 |
| Mokhanni IC | SSD1315 |
| Palo ea li-volts | 1.65-3.3 V |
| Mocheso oa Ts'ebetso | -30 ~ +70 °C |
| Mocheso oa polokelo | -40 ~ +80°C |
Tlhaloso ea Sehlahisoa
X032-6032TSWAG02-H14 COG OLED Display Module - Ts'ebetso e Phahameng le e Tšepahalang
X032-6032TSWAG02-H14 ke mochini o bonts'ang oa OLED oa Chip-on-Glass (COG) o nang le mokhanni o kopaneng oa SSD1315 IC. E ts'ehetsa I²C interface, e nang le logic supply voltage (VDD) ea 2.8V le display supply voltage (VCC) ea 7.25V. Tlas'a mosebetsi oa ho khanna oa 1/32, mojule o sebelisa 7.25mA (e tloaelehileng) ka mokhoa oa 50% oa checkerboard (pontšo e tšoeu).
Likarolo tsa Bohlokoa:
- Mocheso o Pharalletseng oa Tšebetso: -40°C ho ea ho +85°C
- Sebaka sa Mocheso oa polokelo: -40°C ho ea ho +85°C
- Tšebeliso e tlase ea Matla e nang le meaho e sebetsang hantle ea ho khanna
- Ho Tšepahala ho Phahameng & Durability bakeng sa tikoloho e hlokang
Ts'ebetso e Phahameng ka ho Fetisisa bakeng sa Likopo tse fapaneng
E entsoe ka moaho o nepahetseng le o matla, module ea X032-6032TSWAG02-H14 OLED e fana ka boleng bo ikhethang ba ponts'o, botsitso ba nako e telele, le ts'ebetso e ikhethang ea optical. Moralo oa eona o fapaneng o etsa hore e be e loketseng bakeng sa:
- Electronics ea bareki
- Indasteri HMI & Control Systems
- Lisebelisoa tsa Bongaka
- Lipontšo tsa Likoloi le Lisebelisoa
Ebang ke bakeng sa ho baloa ho phahameng ka ho fetisisa, ts'ebetso ea mocheso o pharaletseng, kapa ho kopanya komporo, mojule ona oa OLED o etselitsoe ho kopana le ho feta litlhoko tse batloang haholo tsa kopo.
Ka tlase ke melemo ea pontšo ena ea OLED ea matla a tlase:
1. Thin-Ha ho hlokahale hore u bone khanya e ka morao, ho itšehla thajana.
2. Wide viewing angle : Free degree.
3. Khanya e Phahameng: 160 (Min)cd/m².
4. Karolelano e phahameng ea phapang(Kamore e Lefifi): 2000:1.
5. Lebelo le phahameng la karabo (＜2μS).
6. Wide Operation Mocheso.
7. Tšebeliso e tlaase ea matla.
Sets'oants'o sa Mechini
